LX 21 S 0100 Thumbnail Image LX 21 S 0100 Single DS Receiver
Category : Optopus optical receivers
The LX 21 is part of the Optopus product portfolio. LX 21 is an optical receiver for downstream applications with a wide input range. The Optopus is a highly flexible and high density platform for all kinds of analog optical networks. The system is used in any network such as HFC, RF over Glass or RF Overlay in FTTX applications.
- Optical receiver for use in WISI Chassis LX50
- Automatic level control (ALC)
|
Downstream |
|
| Wavelength | 1280...1630 nm |
| Optical return loss | >40 dB |
| Impedance | 75 Ω |
| Return loss output | ≥18 dB (-1,5 dB/Okt.)min. 14 dB |
| Frequency range | 47...1006 MHz |
| Opt. input level for controlled electrical output level | -7...+3 dBm |
| Max. controlled output level | 90 dBµV (ALC on, 4% OMI) |
| Attenuator range | 0...15 dB (0,5 dB steps) |
| Equalizer range | 0...10 dB (0,5 dB steps) |
| Amplitude response (O-E) | ≤ ±0,5 dB |
| Equivalent noise input | ≤4,5 pA/√Hz |
| Output level | 90 dBµV (CENELEC 42 Ch. (CSO/CTB ≥ 70 dB), flat) |
| Test point | -20 dB |
|
Connectors |
|
| Fiber type | Single Mode 9/125 µm |
| Optical connector | SC/APC connectors |
| RF connectors | F |
|
General data |
|
| Supply voltage | 12 V DC |
| Power consumption | 6,5 W |
| EMC | EN50083-2 |
| Operating temperature range | -5...+45 °C (EN300 019-1-3 Class 3.2) |
| Dimensions (width x height x depth) | 30 x 133 x 320 mm |