LX 15 S 30A0 External modulated Full Spectrum Transmitter CH 27 with optical amplification
Category : Optopus optical transmitter
The WISI OPTOPUS LX 15 S 3xx0 Transmitter series is part of WISI's CCAP migration solution. With its high-power output, it is ideal for cost-effective transmission of full-spectrum 1.2 GHz channel loads over fiber.
- Broad frequency range for DOCSIS 3.1
- Wide transmission reach for capacity utilization of centralized headend sites
- Adjustable high-power output from integrated optical amplification
- Tunable wavelength (optional) enables flexible assignment in DWDM systems
RF signal path |
|
Frequency range | 47...1218 MHz |
Nominal level BC-input | 78 dBµV (per PAL channel) |
Nominal level NC-input | 82 dBµV (per QAM channel with 6 dB back-off) |
Level control narrowcast | -2...+2 dB |
Level control composite | -5...+5 dB (ALC switchable) |
Slope control | -2...+2 dB |
Transmission frequency response | -0,5...+0,5 dB |
Optoelectronic properties |
|
Laser type | Temperature stabilized DFB laser |
Wavelength | 1555.75 nm (100 GHz DWDM, ITU channel 27) |
Optical output power | +10...+14 dBm (adjustable) |
Transmission length | 0...65 km |
SBS suppression | 14 dBm |
Relative intensity noise (RIN) | < -155 dB√Hz |
Signal quality, mixed load (30 ch. PAL + 60 ch. QAM256) |
|
Carrier-to-noise-ratio (CNR) | >51 dB (Transmission over 40 km fiber, Rx input power 0 dBm) |
Composite second order (CSO) | >64 dB (Transmission over 40 km fiber, Rx input power 0 dBm) |
Composite triple beat (CTB) | >64 dB (Transmission over 40 km fiber, Rx input power 0 dBm) |
Modulation error rate (MER) | >43 dB (Transmission over 40 km fiber, Rx input power 0 dBm) |
Bit error rate (BER) | <1e-9 (Transmission over 40 km fiber, Rx input power 0 dBm) |
Signal quality, all-QAM loading (120 ch. QAM256 258...1218 MHz) |
|
Modulation error rate (MER) | >40 dB (Transmission over 65 km fiber, Rx input power 0 dBm) |
Bit error rate (BER) | <1e-9 (Transmission over 65 km fiber, Rx input power 0 dBm) |
Signal interfaces |
|
Electrical return loss | >20 dB |
Decoupling NC/BC input | >50 dB |
Input measurement socket | -20 dB (relative to BC input) |
Output test point | 75 dBµV (at 5% OMI) |
Optical return loss | >40 dB |
Connectors |
|
F-socket rear | 2 pcs. (BC input, NC input) |
F-socket front | 1 pcs. (Test port: composite input / driver output switchable) |
SC/APC connectors | 1 pcs. opt. output |
General data |
|
Dimensions (width x height x depth) | 30 x 133 x 320 mm (Optopus module) |
Power consumption max. | <13 W |
Operating temperature range | -5...+45 °C (ETSI EN 300 019-1-3 class 3.2) |
Enclosure Classification | IP30 |
Laser safety | EN 60825-2 hazard level 1M |
Electro Magnetic Compatibility (EMC) | EN 50082-1, EN 50082-2, EN 50083-2, EN 55022 Class B |