VX 47 2P In-house/distribution amplifier, locally supplied
Category : Distribution amplifier Home Line
Broadband in-house amplifier for use in coaxial networks recommended for 7-12 households, classification 1TS 140 C 3.3, cascade operation
- Zinc die-cast housing
- Flap-lid for easy handling
- Screening ensured with open flap-lid
- Configuration of attenuators and equalizers via PADs and jumpers
- Measuring points at the input and output
- Return path amplifier on the circuit board
- Low power consumption, high output level
|
Downstream |
|
| Inputs | 1 pcs. |
| Frequency range downstream | 85...1006 MHz |
| Gain downstream | 32 dB |
| Noise figure downstream | ≤6,0 dB |
| Attenuator downstream | 0...20 dB (Interstage-loss 0/6 dB) |
| Equalizer downstream | 0...20 dB (Interstage-equalizer 0/7/10 dB) |
| cable simulator downstream | 0...10 dB |
| Output level 1 | 106 dBµV (CENELEC 42 channels, flat, at CSO/CTB >60 dB/>60 dB) |
| Output test point | -20 dB |
|
Upstream |
|
| Frequency range upstream | 5...65 MHz |
| Gain upstream | 22 dB |
| Noise figure upstream | ≤5 dB |
| Attenuator upstream input | 0...20 dB |
| Attenuator upstream output | 0...20 dB |
| Equalizer US | 0...15 dB |
| Output level 4 | 120 dBµV (KDG 1TS140 - average load with QAM 64 MER >35 dB, BER 1x10-8) |
|
Connectors |
|
| F-socket | 4 pcs. |
|
General data |
|
| Operating voltage AC | 230 V (50/60 Hz) |
| Power consumption | 6,0 W (max.) |
| Screening factor | EN 50083-2 |
| Dimensions (width x height x depth) | 163 x 90 x 50 mm |
| Operating temperature range | -20...+55 °C |
| Protection class | IP20 |
| Lightning protection | 4,5 kV (EN60728-3, 1,2/50 µs pulse) |