VX 45 2P In-house/distribution amplifier, locally supplied
Category : Distribution amplifier Home Line
Broadband in-house amplifier for use in coaxial networks recommended for 7-18 households, classification 1TS 140 C 4.3
- Zinc die-cast housing
- Flap-lid for easy handling
- Screening ensured with open flap-lid
- Configuration of attenuators and equalizers via PADs and jumpers
- Measuring points at the input and output
- Return path amplifier on the circuit board
- Low power consumption, high output level
- Unitymedia certfied
|
Downstream |
|
| Inputs | 1 pcs. |
| Input measurement socket | -20 dB |
| Frequency range downstream | 85...1006 MHz |
| Gain downstream | 39 dB |
| Noise figure downstream | ≤6,0 dB |
| Attenuator downstream | 0...20 dB (Interstage-loss 0/6 dB) |
| Equalizer downstream | 0...20 dB (Interstage-equalizer 0/7 dB) |
| Output level 1 | 106 dBµV (CENELEC 42 channels, flat, at CSO/CTB >60 dB/>60 dB) |
| Output test point | -20 dB |
|
Upstream |
|
| Frequency range upstream | 5...65 MHz |
| Gain upstream | 29 dB |
| Noise figure upstream | ≤5 dB |
| Attenuator upstream input | 0...20 dB |
| Equalizer US | 3 dB (Interstage, fix) |
| Output level 4 | 120 dBµV (KDG 1TS140 - average load with QAM 64 MER >35 dB, BER 1x10-8) |
|
Connectors |
|
| F-socket | 4 pcs. |
| Operating voltage AC | 230 V (50/60 Hz) |
| Power consumption | ≤6 W |
| EMC | EN 50083-2 |
| Dimensions (width x height x depth) | 163 x 90 x 50 mm |
| Operating temperature range | -20...+55 °C |
| Protection class | IP20 |
| Lightning protection | 1 kV (EN60728-3, 1,2/50 µs pulse) |