VX 16 C 0650 In-house/distribution amplifier, locally supplied
Category : Distribution amplifier Value Line
Broadband distribution amplifier for use in coaxial networks.
|
Downstream |
|
| Inputs | 1 pcs. |
| Input measurement socket | -20 dB |
| Input return loss | ≥18 dB (-1,5 dB/Okt., 14 dB) |
| Frequency range downstream | 85...1006 MHz |
| Gain downstream | 40/32 dB |
| Noise figure downstream | ≤5 dB |
| Attenuator downstream | 0...20 dB (PAD) |
| Equalizer downstream | 0...20 dB (PAD) |
| Interstage attenuator downstream | 0...8 dB (PAD, 6 dB by 32 dB amplifier) |
| Interstage equalizer downstream | 0/7/10 dB (Jumper, 1006 MHz) |
| cable simulator downstream | 0...10 dB (PAD) |
| Output level 1 | 111 dBµV (CENELEC 42 channels, flat, at CSO/CTB >60 dB/>60 dB) |
| Output test point | -20 dB |
| Output splitter | pcs. optinoal, by distribution module XM...2. Output can be switched |
|
Upstream |
|
| Frequency range upstream | 5...65 MHz |
| Gain upstream | 22/32 dB (return channel full channel load) |
| Noise figure upstream | ≤5 dB |
| Attenuator upstream input | 0...20 dB (PAD) |
| Attenuator upstream output | 0...20 dB (PAD) |
| Equalizer US | 0...15 dB (PAD) |
| Output level 3 | 120 dBµV (1 TS 140 average load QAM64 MER >35, BER <1 x 10-8) |
| Output level 4 | 110 dBµV (US, EN50083-5/2.Ord) |
| Upstream test point | -20 dB |
|
Connectors |
|
| F-socket | 2 pcs. |
|
General data |
|
| Operating voltage AC | 230 V |
| Power consumption | <11,5/<12,5 W (Amplifying 32 dB/40 dB, + 2 W with return channel amplifier) |
| Screening factor | Class A, EN 50083-2 |
| Dimensions (width x height x depth) | 232x145x86 mm |
| Operating temperature range | -20...+55 °C |
| Protection class | IP66 |
| Lightning protection | 5 kV (EN61000-4-5, 1,2/50 µs pulse) |