VX 26 M1 In-house/distribution amplifier, locally supplied
Category : Distribution amplifier Value Line
The VX 26 M1 is a local feeding distribution amplifier with an integrated feedback channel and diplex filter. The settings can be adjusted via jumper or Q-steps and therefore an uninterrupted adjustment option is possible.
- Uninterruptible setting
- Screwed, folding housing cover
- Integrated return channel and diplexers
- All settings via exact switching step (Q-step) or jumper
- Output splitter (jumper)
- Lightning protection HF- connections 4 kV
TECHNACAL DATA
|
Downstream |
|
| Inputs | 1 pcs. |
| Input measurement socket | 20 dB (resistance) |
| Input return loss | >18 dB (-1 dB/oct.) |
| Frequency range downstream | 85...1006 MHz |
| Gain downstream | 41 dB |
| Noise figure downstream | <6 dB |
| Attenuator downstream | 0...15 dB (1 dB-steps) |
| Equalizer downstream | 0...22,5 dB (1,5 dB-steps) |
| Interstage attenuator downstream | 0/5 dB (Jumper) |
| Interstage equalizer downstream | 0/3/6/9 dB (Jumper) |
| Output level 1 | 111 dBµV (CENELEC 42 channels, flat, CSO/CTB >65 dB/>60 dB) |
| Output level 2 | 114 dBµV (CENELEC 42 Kanäle, 6dB slope, bei CSO/CTB 65/60 dB) |
| Output test point | -20 dB (directional coupler) |
|
Upstream |
|
| Frequency range upstream | 5...65 MHz |
| Gain upstream | 24 dB (return channel full channel load) |
| Noise figure upstream | <6 dB |
| Attenuator upstream input | 0...15 dB (1 dB-steps) |
| Attenuator upstream output | 0...15 dB (1 dB-steps + 5 dB Interstage Jumper) |
| Equalizer US | 0/3/6/9 dB (Jumper) |
| Output level US | 112 dBµV (1 TS 140) |
| Output test jack US | -20 dB |
|
Connectors |
|
| F-socket | 4 pcs. |
|
General data |
|
| Operating voltage AC | 180...265 V (50/60 Hz) |
| Power consumption | 18 W |
| Screening factor | dB Class A, EN 50083-2 |
| Dimensions (width x height x depth) | 231 x 158 x 85 mm |
| Operating temperature range | -20...+55 °C |
| Protection class | IP66 |
| Lightning protection | 4 kV (EN61000-4-5, 1,2/50 µs pulse) |