Multi Switch

Optical symmetric 4-way splitter, FC / PC connector, suitable for OL 95 xxxx fiber optic cable.

Optional power supply for optical converter OL 21 xxxx and OL 22 xxxx.

Quad converter for the conversion of the optical input signal into 4 independent subscriber outputs. Converted will be all inserted signals ((DVB-S/S2, DVB-T/T2, DAB and FM). Power supply by the connected stb.or TV sets with integrated satellite receiver or the optional power supply OLPS 0230.

Wholeband LNB with N-connector for installation with OL 140000.

Electric/optical converter for distribution of one satellite, DVB-T/T2, DAB and FM into an optical output signal. Power supply and antenna pipe installation kit included.

The DY 70 is a short circuit-proofed power supply operating at an input voltage of 230 V AC, 50/60 Hz and provides an output voltage of 13 V DC. It is used in combination with multiswitches of the PROSWITCH series, as well as the amplifier DY 40 and surge protector DL 400.

The DY 40 is a SAT amplifier for 4 polarization planes, perfectly suited for the construction of large multiswitch systems. The gain is 30 dB in the frequency range from 950. . . 2150 MHz. The gain can be reduced by up to 20 dB in 2 dB increments using buttons. A slope setting to compensate for the frequency-related cable attenuation is possible up to 12 dB. Power can be supplied via the trunk lines, or alternatively with the seperate power supply unit DY 70. Mechanically compatible to all PROSWITCH devices and the overvoltage protection DL 400.

The DY 1716 is a cascadable multiswitch with 17 inputs for the distribution of four satellites and terrestrial signals. With the separately power supply DY 70 that powers the LNB, the multiswitch is useable as a stand alone device. The polarisations are available at 17 cascade outputs for the installation of further multiswitches. Commercially available DVB-S/S2 set-top-boxes or TVs with an integrated receiver can be used at the 16 subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB or FM are available at each subscriber output as well. The stand-by functionality minimizes power consumption by activating the mulitswitch only in case the connected STB is turned on.

The DY 1708 is a cascadable multiswitch with 17 inputs for the distribution of four satellites and terrestrial signals. With the separately power supply DY 70 that powers the LNB, the multiswitch is useable as a stand alone device. The polarisations are available at 17 cascade outputs for the installation of further multiswitches. Commercially available DVB-S/S2 set-top-boxes or TVs with an integrated receiver can be used at the 8 subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB or FM are available at each subscriber output as well. The stand-by functionality minimizes power consumption by activating the mulitswitch only in case the connected STB is turned on.

The DY 0916 is a cascadable multiswitch with nine inputs for the distribution of two satellites and terrestrial signals. With the separately power supply DY 70 that powers the LNB, the multiswitch is useable as a stand alone device. The polarisations are available at nine cascade outputs for the installation of further multiswitches. Commercially available DVB-S/S2 set-topboxes or TVs with an integrated receiver can be used at the 16 subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB or FM are available at each subscriber output as well. The standby functionality minimizes power consumption by activating the mulitswitch only in case the connected STB is turned on.

The DY 0908 is a cascadable multiswitch with nine inputs for the distribution of two satellites and terrestrial signals. With the optional power supply DY 70 that powers the LNB, the multiswitch is useable as a stand alone device. The polarisations are available at nine cascade outputs for the installation of further multiswitches. Commercially available DVB-S/S2 set-topboxes or TVs with an integrated receiver can be used at the eight subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB or FM are available at each subscriber output as well. The stand-by functionality minimizes power consumption by activating the mulitswitch only in case there is a switched on stb connected.

The DY 0516 is a cascadable multiswitch with five inputs for the distribution of one satellite and terrestrial signals. With the optional power supply DY 70 that powers the LNB, the multiswitch is useable as a stand alone device. The polarisations are available at five cascade outputs for the installation of further multiswitches. Commercially available DVB-S/S2 set-top-boxes or TVs with an integrated receiver can be used at the 16 subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB or FM are available at each subscriber output as well. The stand-by functionality minimizes power consumption by activating the mulitswitch only in case there is a switched on stb connected.

The DY 0508 is a cascadable multiswitch with five inputs for the distribution of one satellite and terrestrial signals. With the optional power supply DY 70 that powers the LNB, the multiswitch is useable as a stand alone device. The polarisations are available at five cascade outputs for the installation of further multiswitches. Commercially available DVB-S/S2 set-top-boxes or TVs with an integrated receiver can be used at the eight subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB or FM are available at each subscriber output as well. The standby functionality minimizes power consumption by activating the mulitswitch only in case there is a switched on stb connected.